Category:Taken with Samsung Sidekick 4G SGH-T839
Jump to navigation
Jump to search
 | This category is hidden and appears in the second line of categories. It is not shown if the appropriate user preference is deactivated. |
Wikimedia category | |||||
| Upload media | |||||
| Instance of | |||||
|---|---|---|---|---|---|
| Category combines topics | |||||
| photographs by photographic equipment used | |||||
photographs which have been taken by a specific camera | |||||
| Instance of | |||||
 | |||||
| |||||
| |||||
Media in category "Taken with Samsung Sidekick 4G SGH-T839"
The following 100 files are in this category, out of 100 total.
-
0.5 ohm power resistor.jpg 2,048 × 1,536; 768 KB
-
25 ohm power resistors.jpg 2,048 × 1,536; 880 KB
-
3 small holes to cool down the power supply.jpg 2,048 × 1,536; 830 KB
-
A red and a black wire are connected to the power resistor.jpg 2,048 × 1,536; 862 KB
-
After burning up the circuit, the voltage of the red wires.jpg 1,536 × 2,048; 953 KB
-
After burning up the circuit, the voltage of the white wire.jpg 1,536 × 2,048; 994 KB
-
All same color wires go with each other.jpg 2,048 × 1,536; 882 KB
-
Another view of the switch.jpg 2,048 × 1,536; 906 KB
-
Attaching new-brand binding posts to the first power supply.jpg 1,536 × 2,048; 764 KB
-
Binding posts are attached.jpg 2,048 × 1,536; 904 KB
-
Binding posts are labeled.jpg 2,048 × 1,536; 700 KB
-
Binding posts labeled.jpg 1,536 × 2,048; 971 KB
-
Binding posts with labels.jpg 2,048 × 1,536; 975 KB
-
Board 1 which should be converted to a LAB power supply.jpg 1,536 × 2,048; 909 KB
-
Board 1 with 5 wires.jpg 1,536 × 2,048; 949 KB
-
Board 2 which should be converted to a LAB power supply.jpg 1,536 × 2,048; 987 KB
-
Currents gotten from the power supply ( 12 volt).jpg 2,048 × 1,536; 842 KB
-
Currents gotten from the power supply ( 3.3 volt).jpg 2,048 × 1,536; 939 KB
-
Currents gotten from the power supply ( 5 volt).jpg 2,048 × 1,536; 866 KB
-
Final output voltage checks 1.jpg 1,536 × 2,048; 698 KB
-
Final output voltage checks 2.jpg 1,536 × 2,048; 724 KB
-
Final output voltage checks 3.jpg 1,536 × 2,048; 742 KB
-
Final output voltage checks 4.jpg 1,536 × 2,048; 720 KB
-
Green and black wire connected to the switch.jpg 2,048 × 1,536; 931 KB
-
I closed the front side and taped it.jpg 2,048 × 1,536; 842 KB
-
I connected the proper wires to the binding posts.jpg 1,536 × 2,048; 896 KB
-
I made three holes and attached binding posts to them.jpg 2,048 × 1,536; 809 KB
-
Inside of the big power supply.jpg 1,536 × 2,048; 900 KB
-
Measure the resistance.jpg 2,048 × 1,536; 837 KB
-
Output voltages- 1.2 volt.jpg 1,536 × 2,048; 1,020 KB
-
Output voltages- 5 volt.jpg 1,536 × 2,048; 999 KB
-
Output voltages- combination of two binding posts voltages.jpg 1,536 × 2,048; 927 KB
-
Performance test label- another view.jpg 1,536 × 2,048; 953 KB
-
Performance test label.jpg 2,048 × 1,536; 974 KB
-
Power resistor is connected to 3.3 volt binding post.jpg 2,048 × 1,536; 767 KB
-
Power resistors.jpg 2,048 × 1,536; 857 KB
-
Power Supply project 01.jpg 2,048 × 1,536; 828 KB
-
Power Supply project 02.jpg 1,536 × 2,048; 941 KB
-
Power Supply project 03.jpg 2,048 × 1,536; 814 KB
-
Power Supply project 04.jpg 1,536 × 2,048; 900 KB
-
Same- color wires.jpg 2,048 × 1,536; 889 KB
-
Switch wires.jpg 2,048 × 1,536; 784 KB
-
Testing circuit picture.jpg 2,048 × 1,536; 907 KB
-
Testing output voltage1.jpg 1,536 × 2,048; 875 KB
-
Testing output voltage2.jpg 1,536 × 2,048; 1,010 KB
-
Testing output voltage3.jpg 1,536 × 2,048; 945 KB
-
Testing output voltage4.jpg 2,048 × 1,536; 886 KB
-
Testing the power supply 1.jpg 1,536 × 2,048; 872 KB
-
The 2nd power supply- almost finished.jpg 2,048 × 1,536; 904 KB
-
The 2nd power supply- binding posts are labeled.jpg 2,048 × 1,536; 656 KB
-
The 2nd power supply- connecting a red and a black wire to the resistors.jpg 2,048 × 1,536; 922 KB
-
The 2nd power supply- connecting all same-color wires.jpg 2,048 × 1,536; 823 KB
-
The 2nd power supply- connecting the green to a black wire.jpg 1,536 × 2,048; 878 KB
-
The 2nd power supply- connecting two 20 ohm resistors.jpg 2,048 × 1,536; 944 KB
-
The 2nd power supply- determining the locations of binding posts and LED.jpg 2,048 × 1,536; 804 KB
-
The 2nd power supply- sticking the resistors and their wires inside the power supply.jpg 2,048 × 1,536; 822 KB
-
The 2nd power supply- the final checks.jpg 2,048 × 1,536; 754 KB
-
The 2nd power supply- wrapping all wires together.jpg 2,048 × 1,536; 970 KB
-
The 360 resistor.jpg 2,048 × 1,536; 861 KB
-
The big power supply 01.jpg 1,536 × 2,048; 1.05 MB
-
The big power supply 02.jpg 2,048 × 1,536; 1.44 MB
-
The board was fixed on a piece of cardboard-1.jpg 2,048 × 1,536; 1.13 MB
-
The board was fixed on a piece of cardboard-2.jpg 1,536 × 2,048; 1.03 MB
-
The board was placed into the carton.jpg 2,048 × 1,536; 1 MB
-
The broken power supply which we got to fix.jpg 2,048 × 1,536; 874 KB
-
The broken power supply.jpg 2,048 × 1,536; 789 KB
-
The carton.jpg 2,048 × 1,536; 1,012 KB
-
The current produced by 12 volt.jpg 2,048 × 1,536; 872 KB
-
The current produced by 3.3 volt.jpg 2,048 × 1,536; 799 KB
-
The current produced by 5 volt.jpg 2,048 × 1,536; 819 KB
-
The final check of LED.jpg 2,048 × 1,536; 881 KB
-
The LAB manufactured power supply.jpg 2,048 × 1,536; 771 KB
-
The LED.jpg 2,048 × 1,536; 859 KB
-
The main board part.jpg 2,048 × 1,536; 1.03 MB
-
The maximum current gotten from the 1.2 volt.jpg 1,536 × 2,048; 953 KB
-
The maximum current gotten from the 5 volt.jpg 1,536 × 2,048; 1,000 KB
-
The maximum current produced by the LAB power supply.jpg 2,048 × 1,536; 907 KB
-
The old power cable was connected to the board 2.jpg 1,536 × 2,048; 1.03 MB
-
The outlet and switch 1.jpg 1,536 × 2,048; 892 KB
-
The outlet and switch 2.jpg 1,536 × 2,048; 1.03 MB
-
The phone cable was connected to the output wires of the board- another view.jpg 2,048 × 1,536; 1.13 MB
-
The phone cable was connected to the output wires of the board.jpg 1,536 × 2,048; 1,007 KB
-
The power resistor was connected to the white wire- 5 volt- and a black wire.jpg 1,536 × 2,048; 993 KB
-
The power supply is almost ready- another view.jpg 1,536 × 2,048; 913 KB
-
The power supply is almost ready.jpg 2,048 × 1,536; 895 KB
-
The power supply labeled as it was tested.jpg 1,536 × 2,048; 648 KB
-
The power supply part.jpg 2,048 × 1,536; 988 KB
-
The red lead is in the 10A jack; the selector is also on 10A.jpg 1,536 × 2,048; 915 KB
-
The resistor is connected to the multimeter-comprehensive view.jpg 2,048 × 1,536; 833 KB
-
The resistor is connected to the multimeter.jpg 2,048 × 1,536; 863 KB
-
The small resistor that had been burned up- closer view.jpg 1,536 × 2,048; 231 KB
-
The small resistor that had been burned up.jpg 2,048 × 1,536; 272 KB
-
The switch and power cable placed on the carton.jpg 2,048 × 1,536; 697 KB
-
The switch is being tested.jpg 2,048 × 1,536; 788 KB
-
The wires is soldered to the binding posts..jpg 2,048 × 1,536; 776 KB
-
Wires are connected to binding posts.jpg 1,536 × 2,048; 927 KB
-
Wires with same voltages were connected to each other.jpg 1,536 × 2,048; 1,010 KB
-
Wrapped by Aluminum foil and clear tape- another view.jpg 2,048 × 1,536; 950 KB
-
Wrapped by Aluminum foil and clear tape- other view.jpg 1,536 × 2,048; 880 KB
-
Wrapped by Aluminum foil and clear tape.jpg 1,536 × 2,048; 1.04 MB
.jpg)
.jpg)
.jpg)
